In the process of scientific experiments, some substances are easily oxidized and deliquescent in the atmosphere, which makes the chemical reaction of the test substance and the pre-treatment of the sample very difficult, which affects the test process and test results.
The laboratory vacuum glove box (also known as the vacuum inert gas operation box) effectively solves these problems. The laboratory vacuum glove box allows the test samples to be safely put in and out, and can be operated freely in the absence of oxygen and water. Reactions and tests ensure the normal progress of scientific experiments.
The laboratory vacuum glove box is an ideal device for scientific experiments in universities, research institutes, and enterprise laboratories. It is widely used in biochemistry, metallurgy, electronics, chemical industry, geology, minerals, medicine, etc.
Laboratory vacuum glove box structure:
The laboratory uses the top and bottom of the glove box to seal the gel to form a clean room space. The sealed gel does not contain silica gel, will not cause pollution, will not cause bacterial regeneration, and can prevent air or moisture from leaking. The bottom is formed at one time, easy clean.
The clear acrylic window of the laboratory vacuum glove box can prevent visual errors. The window is equipped with a hygrometer to monitor the humidity change in the box. Bright white bottom plate
The laboratory vacuum glove box comes with a medical-grade multi-power socket (laboratory glove box), you can easily connect to other equipment, such as balances, oscillators or peristaltic pumps.
The laboratory vacuum glove box has four valves with stainless steel lock clips for air intake and exhaust.
There is a circular inlet on the left side of the laboratory vacuum glove box, equipped with a valve lock, which is used to place larger samples, with a diameter of 30.5cm.
The cylindrical cavity on the right side of the laboratory vacuum glove box is the buffer space. When operating the experiment, you can put the items in the buffer space first, close the external lock, and open the valve of the buffer space from the inside of the laboratory vacuum glove box to transfer the sample Take it out so that the gas concentration and humidity during the experiment will not be affected by the external environment, equipped with a vacuum meter
Laboratory vacuum glove box glove opening diameter 16.5cm/17cm/18cm can be customized according to customer requirements
Standard configuration of laboratory vacuum glove box: vacuum meter (located on the transfer box), 1 pair of latex gloves, 4 safety valves, multi-position power output sockets can be customized according to customer requirements
