Features:
Sheet feeding, upper and lower circular knife cutting mode;
Ultrafine alloy tungsten steel blade, good cutting effect and long service life;
Wide range of slitting material thickness, accurate adjustment of knife consumption;
Motor driven, equipped with feeding guide, small slitting burr;
The slitting width can be adjusted by changing the interval sleeve, and it can also be achieved by configuring a spare knife shaft;
Open knife shaft is fixed, the integrity of the equipment is good, and the operation is convenient;
Technical Parameters
| Power | Single-phase voltage 100 ~ 240VAC ± 10%, frequency 50Hz / 60Hz, power 100W, less than 4Ω ground |
| Use environment | Recommended ambient temperature 25 ± 3 ℃, humidity 30 ~ 90RH, no vibration and electromagnetic interference |
| Slitting method | Monolithic roll cutting |
| Cutter type | Upper and lower circular knife |
| Slitting blade | Ultrafine alloy tungsten steel, diameter Φ100mm |
| Slitting width | Adjustable range: 20 ~ 230mm, can be customized as 20 ~ 280mm |
| Width adjustment | Replacement spacer adjustment, standard 56/56/58/58 four pieces |
| Cut thickness | 100~300μm |
| Glitch condition | ≤25μm |
| Depth of Cutting | 0.2~0.4mm adjustable, dial indicator display |
| Slitting speed | Max. 4m/min |
| Installation size | L870mm*W970mm*H450mm; L34.3*W38.2*H17.7inch |
| Weight | About 100Kg |
Reviews
There are no reviews yet.